Accessories

Thermocouple GPTC (60013517)

MI cable with fixed standard connector

Thermocouple GPTL (60013521) 

MI cable, open wires.

RTD insert TET 90 (1 pair) (016088-9000) 

temperature measurement. Max. measuring range: -50...+200 °C

DELIVERED IN MATCHED PAIRS ONLY.

Insert TPR 100 (60019607) 

Mineral insulated cable (MgO)

Replaceable insert acc. EN60751.

max. measuring range: -200...+600 °C (depending on configuration)

Insert TPR 300 (60022848) 

Replaceable insert (MgO) to use with TR6x line.

max. measuring range: -200...+600 °C (depending on configuration)

TPR300

RTD Insert TET 300 (017574-9000) 

Replaceable Insert (MgO). Connection to EEx d head with 1/2"NPT. Diameter: D = 6 mm.

TET300

Insert TPC 100 (60021184) 

Replaceable insert (MgO)

TPC100

Insert TPC 200 (71128523) 

Thermocouple insert with ceramic isolator for installation in high temperature assemblies of TAF series. Thermocouple sensor types J, K, R, S, B

TPC200

Insert TPC 300 (60022847) 

Replaceable insert (MgO) to use with TC6x line.

Insert TEC 300 (017578-9000) 

Replaceable Insert (MgO). Connection to EEx d head with 1/2"NPT.

RTD Insert TU 111, General Purpose U.S.Style Spare Part (51008326) 

Spring loaded. General purpose.

Pt100 Sensor comply with IEC60751 standard, alpha=0.00385.

TC Insert TU 121, General Purpose U.S.Style Spare part (51008327)

Thermocouple Insert spring loaded.

Thermocouple comply with EMF tables of ASTM E-230 and IEC60584.

Color codes per ASTM E-230.

RTD Insert TU 211, Approved U.S.Style Spare part (71000577)

Flame path Nipple. Spring loaded.

Pt100 Sensor comply with IEC60751 standard, alpha=0.00385.

TC Insert TU 221, Approved, U.S.Style Spare part (71000579)

Thermocouple Insert spring loaded. Flame path Nipple.

Thermocouple comply with EMF tables of ASTM E-230 and IEC60584, color codes per ASTM E-230

Oval flange adjustable, DIN 43734, 16 mm

Oval flange adjustable, DIN 43734, 23 mm

Compression Fitting TA 50 (015634-9000) 

Screw in.

Compression Fitting TA 56 (60021133)

Weld in.

Compression Fitting TA 60 (015635-9000) 

flange connection.

Compression Fitting TA 70 (015637-9000) 

conical sealing. incl. Weld in adapter. Food + Pharma.

Terminal Head TA30A (71071386)

Retainer for terminal block or head transmitter + optional display.

Cover: low, hinged, optional window.

Material: aluminium.

Coating: polyester powder-coating.

Colour: body blue, cover grey.

Ambient temp.: -50...+150 °C (housing).

Protection: IP66/68, NEMA 4X (housing).

Terminal Head TA30D  (71071389)

Retainer for 2 head transmitters or terminal blocks.

Cover: high, hinged.

Material: aluminium.

Coating: polyester powder-coating.

Colour: body blue, cover grey.

Ambient temp.: -50...150 °C (housing).

Protection: IP66/68, NEMA 4X (housing).

Terminal Head TA30H (71071390)

Retainer for terminal block or head transmitter + optional display.

Design: explosion proof

Cover: screwed, optional window.

Material: aluminium.

Coating: polyester powder-coating.

Colour: body blue, cover grey.

Ambient temp.: -50…+150 °C (housing).

Protection: IP66/68, NEMA 4X (housing).

Terminal Head TA30P (71106559)

Retainer for 2 head transmitters or terminal blocks.
Cover: high, hinged.
Material: Polyamid PA12 antistatic.
Colour: black.
Ambient temp.: -40...+120 °C (housing).
Protection: IP65 (housing).

Terminal Head TA20B (55000423)

Connecting head to mount a measuring insert with head transmitter or a connection socket. To be mounted on an armature or protective sleeve.

Material: Polyamid black

Ambient temperature: max. +80 °C

Protection: IP65

Terminal Head TA20J (60015949)

Material: Stainless steel AISI 316L / W1.4404

Ambient temperature: max. +100 °C; ATEX: +95 °C

Protection: IP66/IP67

Terminal Head TA20R (60015948)

Material: Stainless steel AISI 316L W 1.4404.

Ambient temperature: max. +100 °C, ATEX: +95 °C.

Protection: IP66/IP67

Terminal Head TA21E (60019615)

Connection head with screw cap to mount a measuring insert with head transmitter or a connection socket.

Protection grade: IP65

Material: Aluminium pressure die-casting

Ambient temperature: max. +100 °C; ATEX: +95 °C.

Terminal head TA21H (60021372)

Ambient temperature blind cover -40 to +100 °C

Protection grade: NEMA 4X, IP66 to IP68

Enclosure TU 401, U.S.Style (71024826)

Alu - screwed cover with chain

Coating Sheath TA 730 (016934-9000)

In PTFE, PVDF, Titanium and Tantalum for thermowells TW13, TR13 and TC13 according to DIN Form F.

PTFE, PVDF calculation formula TL = L+15 mm

Titanium/Tantalum calculation formula TL = L+1 mm

L = thermowell immersion length

Welding Socket TA 115 (60021960)

Weld-in socket for bar stock thermowell according to DIN 43772 form 4. From round bar stock diameter 50 mm, L=50 mm

TN 15 Extension neck for thermowell (51010637)

Neck tube made from welded parts, with thread connection to a terminal head form DIN B and different connections to a separate thermowell.

Field housing TAF 10 (51000883)

Application: E+H Head transmitter

Housing: Alu IP66, 100 x 100 x 60 mm.

Configuration kit TXU 10 (51007616)

for PC-programmable devices set-up programme + interface cable for PC with USB-Port

Display for head transmitter TID 10 (71070707)

to plug on. Dot-Matrix measured value display. 12 DIP-switches buttom side.

Settings:

FF: Simulation, Write Lock.

PA: Bus address, Write Lock.

Compatible: TMT85, TMT84.

TID10

DIN rail clip

according to IEC 60715 for temperature head transmitters.

TAG for Instrument (016529-9000)

EA-SIT/DKD Calibration Certificate TZC 133 (60015922)

Calibration of TC between -80...+1100 °C, RTD between -80...+650 °C and traceable to national measuring standards, certified by SIT.

Sensor-Transmitter-Matching: only for RTD thermometer and Transmitter: TMT162R, TMT142R, TMT85, TMT84

Factory Calibration Certifikate TZC 134 (60015923)

Calibration of TC (-80...+1400 °C), RTD (-80...+650 °C) and analog output signals, traceable to national measuring standards.

Sensor-Transmitter-Matching: only for RTD thermometer and Transmitter: TMT162, TMT142, TMT85, TMT84

E+H Evalution Test Report TZC 150 (60019748)

Alternative, if immersion length too short for calibration. (NO CERTIFICATE) For RTDs.

Evaluation: 0...+140 °C.

Material Certificate TZC 131 (55000502)

Material certificate for thermometers and thermowells.

NACE MR0175 not for 316Ti.

Delta-Ferrite content <= 3% for hygienic thermometers only.

One certificate per order position with identical items.

Inspection Test Report TZC 135 (60015926)

Issued by E+H Quality Department related to the visual, dimensional, insulation, test at 0 °C, TAG check for sensors, functionality at 4 mA, 12 mA and 20 mA for transmitters. One certificate per identical item.

Insulation Test Certificate TZC 136 (60015927)

at high temperature. for sensors RTD, TC. Issued by E+H production dept. according to different standard. One certificate per each item.

Vibration Test Certificate TZC 137 (60015924)

for RTD and TC, issued by E+H Quality department, according to different specification. One certificate per each test.

Hydrostatic Test Certificate TZC 138 (60015925)

Internal and external pressure test for thermowells at ambient temperature.

Max thermowell length for external pressure test: 1100 mm.

Max. test pressure 400 bar, depending on material, process connection, flange rating etc.

Certificate in accordance to E+H internal test procedure QPA9602 and DIN 43763.

Helium Leakage Test TZC 139 (71074118)

According to EN 1779:2001 appendix A. Suitable for pipe or bar stock thermowells, price for each item.

Min. testing length 100 mm.

Max. testing length 13 m.

PMI Test TZC 161 (71074125)

Positive Material Identification. Non destructive X-ray test to verify the chemical composition of the materials.

Ferrite Content Test TZC 162 (71074126)

Non destructive magnet inductive test to verify the ferrite content of steels.

Radiographic Test TZC 122

Certificate issued by E+H production according to ASTM E-608/235 for each inset.

TZC122,

60015928

Liquid Penetrant Test Report TZC 125

Issued by E+H laboratory, according to ASME V and ASME VIII for each item

TZC125,

60008149

TZC126,

60008150

Radiographic Test TZC 127

Certificate issued by E+H laboratory according to ASME V - ASME VIII for thermowells weldings. Inspection for diameters of max. 80 mm and wallthickness of 8 mm, max. length 2000 mm.

TZC127,

60015929

Thermowell Calculation TZC 129

Thermowell stress calculation acc. to ASME PTC19.3; carried out at E+H.

Required process information:

- type of medium

- design pressure

- design temperature

- flow rate/medium speed.

Only applicable for straight and tapered bar stock thermowells (not for stepped versions).

TZC129,

60021183

Bore Concentricity Test TZC 140

for thermowells, price for each item

TZC140,

60016838

Cleaning for oxygen service TZC 141

with single sealed bag, for metallic wells and accessories, acc. DIN19247-2

Max. applicable dimensions: Length 320 mm, Width 130 mm, Height 150 mm

TZC141,

60005575

Cleaning for oxygen service TZC 142

with double sealed bag, for metallic wells and accessories, acc. DIN19247-2

Max. applicable dimensions: Length 320 mm, Width 130 mm, Height 150 mm

TZC142,

60007791

2-D-Dimensional drawing AutoCAD DWG + PDF (50042242)

acc. spec. ordercode + size for Compact Thermometers TMR3x, Flowphant DTT3x, Thermophant TTR3x, recorders, system components + transmitters

3-D-Model format STEP  (50042242)

acc. spec. ordercode for Compact Thermometers TMR3x, Flowphant DTT3x, Thermophant TTR3x, recorders, system components + transmitters